Annke cameras
with LookoutNVR.

Stream addresses

Lookout reads these from the camera itself over ONVIF. Type one in only when ONVIF is off. Put the camera's user name, password and address in place of user, password and camera-address.

Main stream	rtsp://user:password@camera-address/Streaming/channels/101
Second stream	rtsp://user:password@camera-address/Streaming/channels/102
RTSP port	554
ONVIF	Lookout tries it first, then the RTSP address
DVR and NVR channels	/Streaming/channels/<ch><01|02>

Some Annke models use /ch1/main/av_stream and /ch1/sub/av_stream.

Before you add it

• Check the recorder or camera menu for ONVIF and switch it on. If there is no ONVIF or RTSP setting anywhere, the system is app-only and Lookout cannot record it.
• Switch on RTSP or ONVIF in the camera's settings if it ships with them off, and make a user for Lookout.
• Set the second stream to about 640 pixels wide in H.264. Lookout records the main stream and watches the second one.
• Give the camera a fixed address and turn on NTP, so its clock is right.

The camera setup guide has the rest.

What works

Feature	Status	Note
Live view and recording	Supported	Through ONVIF, on models that offer it.
Import from the brand's DVR or NVR, analog cameras included	Beta	Through the ONVIF recorder import, if the DVR or NVR has ONVIF switched on.
Camera-side AI events (person, vehicle)	Beta	Through ONVIF events, if the camera offers them.
Doorbell button presses	Not yet
Siren and light outputs	Not yet
PTZ control	Not yet
Two-way audio	Not yet

Where this comes from

Annke: the maker's documentation, not yet checked against the full cam.

Field-proven means it runs on one of our recorders at a real site today. Supported means it works through ONVIF or RTSP. Brand names belong to their owners.

Something wrong?

Makers, installers and owners: if a model changed or an address is wrong, send a correction and we update this page.

Trouble adding a Annke camera? Support is included, and we work it through with you.

Every camera brand