Hanwha Vision (Wisenet) cameras
with LookoutNVR.
Supported through ONVIF Profile S, G, T and M, which the current Q, X and P AI models list.
Stream addresses
Lookout reads these from the camera itself over ONVIF. Type one in only when ONVIF is off. Put the camera's user name, password and address in place of user, password and camera-address.
| Main stream | rtsp://user:password@camera-address/profile1/media.smp |
|---|---|
| Second stream | rtsp://user:password@camera-address/profile2/media.smp |
| Third stream | rtsp://user:password@camera-address/profile3/media.smp |
| RTSP port | 554 |
| ONVIF | On |
| DVR and NVR channels | Multi-sensor cameras and encoders: /<sensor 0-3>/profile2/media.smp. Hanwha NVRs: /LiveChannel/<ch from 0>/media.smp |
Which profile holds which resolution depends on the camera's profile settings. Applies to current Wisenet, older Samsung SNx models and Wisenet T thermal.
Before you add it
- There is no default password. Set the admin password on first access; ONVIF and the camera API stay off until you do.
- Main stream is /profile1/media.smp and the second profile /profile2/media.smp.
- Five wrong passwords within 30 seconds blocks sign-in for a while. Fix the password once, then wait.
- Switch on RTSP or ONVIF in the camera's settings if it ships with them off, and make a user for Lookout.
- Set the second stream to about 640 pixels wide in H.264. Lookout records the main stream and watches the second one.
- Give the camera a fixed address and turn on NTP, so its clock is right.
The camera setup guide has the rest.
What works
| Feature | Status | Note |
|---|---|---|
| Live view and recording | Supported | ONVIF or RTSP at /profile1/media.smp. |
| Import from the brand's DVR or NVR, analog cameras included | Beta | Through the ONVIF recorder import, if the NVR has ONVIF switched on. |
| Camera-side AI events (person, vehicle) | Beta | Through ONVIF events. The richer attributes stay in Hanwha's own API. |
| Licence plates from plate cameras | Not yet | Road AI plate reads use Hanwha's own API and are not read yet. The video records. |
| Thermal alarms | Not yet | |
| Siren and light outputs | Beta | Relay outputs over ONVIF, which switch whatever is wired to them. |
| PTZ control | Not yet | |
| Two-way audio | Not yet |
Where this comes from
Hanwha Vision (Wisenet): the maker's documentation.
Field-proven means it runs on one of our recorders at a real site today. Supported means it works through ONVIF or RTSP. Brand names belong to their owners.
Something wrong?
Makers, installers and owners: if a model changed or an address is wrong, send a correction and we update this page.
Trouble adding a Hanwha Vision (Wisenet) camera? Support is included, and we work it through with you.